OmniCure® LX400 Controller

OmniCure^® LX400 Controller NEW

The OmniCure® LX400 UV LED Spot Curing System utilizes the highest power and most reliable LED technology in one of the smallest form factor currently available for UV adhesive curing. The OmniCure® LX400 controller can operate four UV LED Heads independently or simultaneously, each of a different wavelength (UV LED Heads available in 365nm, 385nm and 400nm). This is unique to the OmniCure® LX400 controller, setting it apart from other UV LED bonding systems available today. This enables it to accommodate more applications.

Compatible with all LX Series Accessories

With patented Intelli-Lamp® technology applied to the LED head design, LED temperature and lamp life are monitored allowing for an optimized life guarantee of 10,000 hours of operation, or three years.

» Features & Benefits
» Specifications
» LX300 vs LX400

Features	Benefits
9,500mW/cm² Maximum Irradiance (with the 385nm UV LED Head)	Gives highest power that UV LED technology offers for high speed adhesive curing applications or for curing larger spots applications.
UV LED Heads are available in 3 different wavelengths, 365nm, 385nm and 405nm	Will accommodate more of today's current adhesives to maximize selection or minimize changes to your existing process.
Controls up to Four UV LED Heads Simultaneously with a single connection or independently	System is easily configured to simultaneously cure four of the same or four unique applications for greater production efficiency.
Each Head Can be Set for Different Exposure Times and Irradiance Levels in 1% Increments	Precisely set the UV Light exposure Required for the UV Curing Application.
Reliable and Easy-to-Use Design	Front panel controls do not require extensive operator training or system downtime.
Small Footprint	Easily used as a standalone solution or embedded into automated manufacturing lines and equipment. Extra cooling of the unit or environment is not required.
Energy Efficient and Environmentally Friendly	Consumes 80% less power when compared to a UV arc lamp spot curing system (less than 80VA when operating four LED heads at full power).
Adherence to Category Safety Standards	RoHS compliant and meets CE requirements.

Description
Connectable Heads	1 to 4 multi-wavelength (365nm, 385nm and 400nm), individual UV LED Heads
LED Indicators	LED's indicate: Timer Control, Level, Trigger Mode and Emission (UV ON)
Mode Control	Mode and Up/Down button to control the display mode
Timer	Programmable trigger, adjustable countdown range from 999.9s to 0.1s, in 0.1s intervals or user selectable timing via trigger level
Level	15%-100% (with 1% increments)
Start/Stop	Start/Stop button to control start or stop of the LED emission
Key Switch	Key switch to turn on/off controller
Flashing Alarm	Over temperature protection and lamp-off alarm for LED heads
Foot Pedal	Foot pedal to control start/stop of LED Emission

External PLC Control
Method	PLC
External Input	Start/Stop, intensity level select, lock out front panel interface and timer mode select
External Output	Emission alarm

Operating Voltage	Controller supply input: 12 VDC, 4A Input to AC adaptor: 100-120VAC / 200-240VAC (+/-10%) & 50/60Hz
Ambient Temperature / Humidity Range	Controller: 5° to 35°C, 85% max. (no condensation)
Storage Temperature / Humidity Range	Controller: -10° to 60°C, 85% max. (no condensation)

Foot Pedal Channel Control

Feature Comparison between the OmniCure® LX300 Controller and the OmniCure® LX400 Controller.

The following table captures the main differences between the two controllers:

Function	OmniCure® LX300 Controller	OmniCure® LX400 Controller
Channel Control	Mode settings same for all channels	Individual control of TIMER and LEVEL
Output Intensity	Half and Full (50 and 100%)	15 to 100% in 1% Increments
Number of Foot Pedals	1	4
PLC connections	9	22